User manual

145

should be displayed - it is recommended to have the critical errors and

warnings displayed at all times, and decide voluntarily about the information

messages

12.3.Areas and Adapters Profiles

In the Adapters and network areas settings dialogs you can edit setting related to

assigning of defined profiles to specific adapters and referring and respective

networks:

 Disable area detection and automatic profile switch - one of the defined

profiles can be assigned to each network interface type, respectively to each

area. If you do not wish to define specific profiles, one common profile defined

during the Firewall Configuration Wizard will be used. However, if you decide

to distinguish profiles and assign them to specific adapters and areas, and

later on - for some reason - you want to switch this arrangement temporarily,

tick the Disable area detection and automatic profile switch option.

 List of adapters, areas and assigned profiles - in this list you can find an

overview of detected adapters and areas. To each of them you can assign a

specific profile from the menu of defined profiles (all profiles are primarily

defined within the Firewall Configuration Wizard, or later you can create

new profiles in the Profiles dialog of the Firewall Settings). To open this menu,

click the respective item in the list of adapters, and select the profile.

 Advanced settings - ticking the respective option will deactivate the feature