User manual

94
maximum safety.
9.15. Ignore Error Status
In the Ignore error status dialog you can tick those components that you do not want to get informed about:
By default, no component is selected in this list. It means that if any component is given an error status, you
will be informed about it immediately via:
system tray icon - while all parts of AVG are working properly, the icon is displayed in four colors;
however, if an error occurs, the icon appears with a yellow exclamation mark,
text description of the existing problem in the Security Status Info section of the AVG main window
There might be a situation that for some reason you need to switch a component off temporarily. This is not
recommended, you should try to keep all components permanently on and in default configuration,
but it may happen. In this case the system tray icon automatically reports the component's error status.
However, in this very case we cannot talk about an actual error since you have deliberately induced it yourself,
and you are aware of the potential risk. At the same time, once being displayed in grey color, the icon cannot
actually report any possible further error that might appear.
For this situation, within the Ignore error status dialog you can select components that may be in an error
state (or switched off) and you do not wish to receive information about it. Press the OK button to confirm.
9.16. Advisor - Known Networks
The AVG Advisor includes a feature that monitors networks you connect to, and if a new network is found (with
an already used network name, which can lead to confusion) it will notify you and recommend that you check
the network's safety. If you decide that the new network is safe to connect to, you can also save it to this list