User manual

50
The settings are only valid for the current user account. That means, each user on the computer can have their
own sound settings. If you want to allow the sound notification, keep the Enable sound events option
checked (the option is on, by default) to activate the list of all relevant actions. You may also want to check
the Do not play sounds when full screen application is active option to suppress the sound notification in
situations when it might be disturbing (see also the Gaming mode section of the Advanced settings/
Appearance chapter in this document).
Control buttons
Browse... - having selected the respective event from the list, use the Browse button to search your
disk for the desired sound file you want to assign to it. (Please note that only *.wav sounds are
supported at the moment!)
Play - to listen to the selected sound, highlight the event in the list and push the Play button.
Delete - use the Delete button to remove the sound assigned to a specific event.
9.3. Temporarily disable AVG protection
In the Temporarily disable AVG protection dialog you have the option of switching off the entire protection
secured by your AVG Internet Security 2014 at once.
Please remember that you should not use this option unless it is absolutely necessary!
In most cases, it is not necessary to disable AVG Internet Security 2014 before installing new software or
drivers, not even if the installer or software wizard suggests that running programs and applications be shut
down first to make sure there are no unwanted interruptions during the installation process. Should you really
experience problems during installation, try to deactivate the resident protection (in the linked dialog,