User manual

11
to change this location, use the Browse button to display the drive structure, and select the respective folder.
To revert to the default destination pre-set by the software vendor use the Default button.
Then, press the Next button to proceed to the Custom Options dialog.
Control buttons
As within most setup dialogs, there are three control buttons available:
Cancel - click to exit the setup process immediately; AVG Internet Security 2013 will not be
installed!
Back - click to go one step back to the previous setup dialog.
Next - click to continue the installation and go one step further.
3.5. Custom options
The Custom Options dialog allows you to set up detailed parameters for the installation:
The Component Selection section provides an overview of all AVG Internet Security 2013 components that
can be installed. If the default settings do not suit you, you can remove/add specific components. However,
you can only select from components that are included in your purchased AVG edition! Highlight any
item in the Component Selection list, and a brief description of the respective component will be displayed
on the right side of this section. For detailed information on each component's functionality please consult the
Components Overview chapter of this documentation. To revert to the default configuration pre-set by the
software vendor use the Default button.
Control buttons
As in most setup dialogs, there are three control buttons available: