User manual

Table Of Contents

Within this dialog, you can specify the Network name, provide the Network

description and possibly assign the network as safe. The new network can be either

defined manually in a standalone dialog opened via the Add IP button (alternatively Edit

IP / Delete IP), within this dialog you can specify the network by providing its IP range

or mask. For large numbers of networks that should be defined as parts of the newly

created network you can use the option of Advance IP range representation: enter

the list of all networks into the respective text field (any standard format is supported)

and press the Verify button to make sure the format can be recognized. Then press

OK to confirm and save the data.

Edit network - opens the Network properties dialog window (see above) where you can

edit the parameters of an already defined network (the dialog is identical with the dialog for

adding new networks, see the description in the previous paragraph).

Delete network - removes the reference to a selected network from the list of networks.

Mark as safe - by default, all networks are considered unsafe, and only if you are sure the

respective network is safe can you use this button to assign it (and vice versa, once the

network is assigned as safe, the button text changes to "Mark as unsafe").