User guide

Schedule Scan
10
 If automatic updates are enabled but no AVG update is detected, the table cell is blank,
unless a manual update is also scheduled.
 If automatic updates are disabled, then a red-cross icon displays, even if a manual
update is scheduled.
 If a manual update is scheduled, a time stamp displays.
Schedule Scan
Security > Schedule Scan
The Schedule Scan page schedules security protection scans of selected machine IDs licensed to use
Endpoint Security. The list of machine IDs you can select depends on the machine ID / group ID filter
and the scope you are using. To display on this page, machine IDs must have the Endpoint Security
client software installed on the managed machine using the Security > Installation (page 15) page.
Actions
 Scan - Click to schedule a scan of selected machine IDs using the scan options previously
selected.
 Cancel - Click to clear a scheduled scan.
Schedule Settings
 Immediate - Check to schedule this task immediately.
 Date/Time - Enter the year, month, day, hour, and minute to schedule this task.
 Stagger by - You can distribute the load on your network by staggering this task. If you set this
parameter to 5 minutes, then the task on each machine ID is staggered by 5 minutes. For
example, machine 1 runs at 10:00, machine 2 runs at 10:05, machine 3 runs at 10:10, ...
 Skip if Machine Offline - If a checkmark displays and the machine is offline, skip and run the
next scheduled period and time. If no checkmark displays, perform this task as soon as the
machine connects after the scheduled time.
 Every N Periods - Check the box to make this task a recurring task. Enter the number of periods to
wait before running this task again.
Table Columns
 Check-in Status - These icons indicate the agent check-in status of each managed machine.
Hovering the cursor over a check-in icon displays the agent quick view window.
Online but waiting for first audit to complete
Agent online
Agent online and user currently logged on.
Agent online and user currently logged on, but user not active for 10 minutes
Agent is currently offline
Agent has never checked in
Agent is online but remote control has been disabled
The agent has been suspended
 (Select All Checkbox) - Click this checkbox to select all rows in the paging area. If checked, click this
checkbox to unselect all rows in the paging area.
 Machine.Group ID - A unique machine ID / group ID / organization ID name for a machine in the
VSA.
 Last Scan - This timestamp shows when the last scan occurred. When this date changes, new
scan data is available to view.