User manual

· Inform other AVG Admin Servers about update

By ticking this checkbox you will allow the application to also inform other AVG

Admin Servers about newly downloaded updates.

Enter the appropriate server IP value(s) to the IP addresses of subordinated

servers field. The AVG Managed Update updating command will then be sent to

these addresses. As a part of this command is information about the URL to be

used for updating.

If the AVG Admin Server does not receive a confirmation of the AVG Managed

Update command acceptance from one of the defined servers, it will repeat the

attempt later. Choose the requested time interval (in minutes) in the Time until

next attempt connect (minutes) section.

· IP addresses of trusted sources of update commands

If you need the AVG Admin Server to accept unsecured AVG Managed Update

commands from different AVG Admin Servers, it is necessary to define IP

addresses of trusted servers into this field.

Fill this field only on servers, which are subordinated to AVG Admin Servers

accepting AVG Managed Update commands from the AVG Technologies company.

All server addresses on this tab can be inserted in the same way as addresses in

the Client Info dialog (i.e. as a full IP address, station name, IP address range,