User manual

Shared Settings for Stations/Groups/Allowed Actions.

· Mandatory settings

The mandatory/monitored settings can be used for disabling/enabling various

actions within the station settings. By marking an item as mandatory, the user

on the local station will not be able to customize it.

For more information see chapter Configuration/Shared Settings for Stations/

Groups/General control and priority levels.

· Scheduled scan cancellation

You can decide, whether you want to allow the local user to stop a running

scheduled scan or not. This can be done via Shared settings for stations/groups

or in the individual station settings. To do so, navigate to Schedules/

Scheduled scan item and in the right part of the dialog tick the User can stop

a running task checkbox.

11.8. Requests handling and status messages

This chapter describes requests, their handling and processing within AVG DataCenter.

· Requests sent to a single station

If a request is invoked from AVG Admin Console (e.g. request for settings

synchronization, update performing, etc.) a message appears in the Status

Window and at the same time, the request is stored within the AVG DataCenter.

Then the station is notified about the request and if it is online, it will start

processing it immediately. Information about the result is delivered back to the

AVG DataCenter and instantly displayed in the Status window. Error messages

appear in red color.

In special cases two situations may happen:

· The station is online but for some reason cannot accept the request (e.g.

notification port is not working correctly for some reason), the server will

try to periodically delivery the request (default interval is five minutes).

Note: This interval can be changed in Shared settings for stations/groups,

Remote Administration item, advanced settings section, Retrieve

messages from server every drop down menu.