User manual

If the update went correctly, but after some time the stations become out-of-date

again, check the following settings:

1. From the upper menu Tools select the Shared settings for stations item.

2. Navigate to the Schedules and select Virus database update schedule.

3. In the right part of the dialog verify, that the Enable this task checkbox is

ticked and also, that the schedule is predefined the way you require it. Click OK

to close the dialog and confirm the changes.

Note: You should repeat this action also for Program update schedule.

4. Right-click on the Stations node or a particular station in a stations view and

from the context menu select Synchronize settings.

If you received an error during the previous steps, or your stations still show non-

compliant conditions as far as the updates are concerned, try to continue with these

steps:

1. From the upper menu Tools select the Shared settings for stations item.

2. Navigate to the Update and select URL.

3. In the right part of the dialog verify, that the correct update addresses are

entered. I.e. if you’re using the UpdateProxy role of the AVG Admin Server, your

AVG Admin Server address should be visible. Otherwise, you should see the

default AVG update servers (see below).

4. Correct the addresses, if needed, and click OK to confirm the changes.

5. Wait until all stations get synchronized. (Default synchronization period is 60

minutes.)

Alternatively, you can force immediate synchronization of all stations: Right-click on

the Stations node and from the context menu select Synchronize settings.

If you are not getting updates to your AVG Admin Server UpdateProxy at all and your

Internet connection is working correctly, try to check the AVG Admin Server status

page first. To do so open your AVG Admin Server IP address or domain name with the

correct port number (default is 4158) in your web browser. For example:

http://localhost:4158/

In the UpdateProxy server role section you will find the UpdateProxy status as well