User manual

(s) will be sent to. Separate individual items by a comma.

· Blind copy - An optional value. Specify one or more e-mail addresses that the

report(s) will be sent to as a blind copy (no other recipients will see these

addresses). Separate individual items by a comma.

· From - An optional value. Specify the sender's e-mail address and/or sender's

name and e-mail address in angle brackets <user@address.com>

· Reply to - An optional value. Specify a reply e-mail address.

· Subject - enter some text to recognize the reports.

The Server for sending e-mails (SMTP) section contains these customizable fields:

· SMTP server - insert your SMTP server address (can be an IP address or a

domain name).

· SMPT port - specify the SMTP server port number. Default value is 25.

If your SMTP server requires authentication for sending e-mails, enter the login details

below:

· SMTP Login - specify username.

· SMTP Password - specify password.

To verify the e-mail properties you can optionally use the Send test e-mail button to

send a test message to the predefined e-mail recipient(s) via the entered SMTP

server.

Confirm all changes of the server configuration by the OK button. However, the

changes are applied after the server launches again with the new configuration. If the

AVG Admin Server is running, a dialog will prompt you to restart the server (note

that the server will be inaccessible for some time during the restart).

10.5. Connection String

Stations are connected to the AVG DataCenter via a so called connection string.

This string consists of your AVG Admin Server address and a port number. For

example:

localhost:4158