User manual

10.2.2. Profiles

Firewall profiles can be renamed/deleted/duplicated or imported only within the Shared

Firewall settings.

The chosen set of profiles is then automatically applied to all other Firewall settings

sets (i.e. individual stations and groups).

Note: The bold highlighted profile name does indicate, that the profile is set as

mandatory. The profile settings mandatory/monitored status can be verified (or

changed) in the Areas and Adapters profiles section above.

Warning: If you delete all predefined profiles (except for Allow all and Block all) and

keep no profile active (mandatory), the station will (once synchronized), use the

default profile Block all, which will block the whole communication and you will not be

able to connect to the station anymore!