User manual

6.3.2. Scan Results Synchronization

This synchronization process sends data from the station to the AVG DataCenter. It

takes place:

· every time the station powers on/goes online (at the latest within 20 minutes),

· immediately after scan completion or after an infection is detected by the

Resident Shield,

· immediately or latest within 20 minutes when there is a scan result modification

done by a user on the station in the AVG User Interface (healing, moving to

vault etc.).

It is also possible to request immediate scan results synchronization from the AVG

Admin Console. Simply right-click on a station's node in the navigation tree or on a

particular station in a stations view and select All Tasks/Ask for scan results from

the context menu.

6.3.3. Station Components States Synchronization

This synchronization process sends data from the station to the AVG DataCenter. It

takes place:

· every time the station powers on/goes online (immediately),

· every time a component state is changed (within 5 minutes).

It is also possible to request immediate synchronization from the AVG Admin Console.

Simply choose a station's node in the navigation tree, in a stations view right-click and

from the context menu select All Tasks/Refresh components state from the

context menu.

6.4. Stations

The Stations item allows you to view complex information about all stations currently

managed by the AVG DataCenter. The record of a station is created once the station

first logs in to the AVG DataCenter.

You are allowed (using the context menu over the table of groups of stations

displayed in the view section) to create groups of stations, and to assign a single

station into specific groups.