Instruction manual

HOLE “C”

SHELF OUTLINE

TP3

CORNER “D”

FIG 3

CAUTION

CLASH

FIG 4

USE TEMPLATE (TP3) TO SIMULATE THE SCREEN

AND SUPPORT SHELF ORIENTATION

ENSURE HOLE MARKED “C” (SEE FIG 3) IS

INSIDE SLOT MARKED “B” (SEE FIG 1)

IN ORDER TO ACHIEVE THE

DESIRED LAYOUT IT, MAY BE

NECESSARY TO INVERT THE

TEMPLATES (TP1) AND (TP2).

THIS IS NORMALLY REQUIRED

IF ANGLE “X” IS GREATER

THAN ANGLE ”Y”, AS SHOWN

IN THE EXAMPLE ABOVE

X°

Y°

IN THE INSTANCE WHERE

STUDDED WALLS EXIST, THE

STUD POSITION WILL

INFLUENCE THE BRACKET

POSITION. USE THE TEMPLATES

TO CHECK POSITION AND

DETERMINE THE IDEAL SET OF

STUDS TO USE

RELEVANT TO STUDDED

WALLS ONLY

WHEN DETERMINING THE SCREEN ORIENTATION ENSURE CORNERS “D”

(SEE FIG 3) DO NOT CLASH WITH (TP1) OR (TP2) (SEE FIG 4)