User`s manual

Set IP
to take effect the settings.
Users can also change the
Printer Name
by another model name in this fields then click
Set Printer Name
to take effect this change.
Note: After clicking the
Set Printer Name
or
Set IP
button, printer will reset to
take effect the settings.
8. Click
Exit
button to exit the Ethernet interface setup and go back to Diagnostic Tool main
screen.
Factory Default button
This function will reset the IP, subnet mask, gateway parameters obtained by DHCP and
reset the printer name.
Web setup button
Except to use the Diagnostic Utility to setup the printer, you can also explore
d
configure the printer settings and status or update the firmware with the IE or Firefox web
browser. This feature provides a user friendly setup interface and the capability to
manage the printer remotely over a network.
22