User`s manual



3.3.2 Printer Function (Calibrate sensor, Ethernet setup, RTC setup
)
1. Select the PC interface connected with bar code printer.
2. Click the
“ Function ” button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start guide in
the CD disk \ Utilities directory.
19
Ethernet Setu
p
Function Description
Calibrate Sensor
Calibrate the sensor specified in the Printer Setup
g
rou
p
media sensor field
Setup the IP address, subnet mask, gateway for
the on board Ethernet (Please refer to next
section
)
RTC Time Synchronize printer Real Time Clock with PC
Print Test Page Print a test page
Reset Printer Reboot printer
Factory Default
Initialize the printer and restore the settings to
factor
y
default.
Dump Text To activate the printer dump mode.
Ignore AUTO.BAS Ignore the downloaded AUTO.BAS program
Configuration Page Print printer configuration