User`s manual



3.2.2 Loading External Media
1. Open the printer’s top cover and separate the media holders to fit the media
width.
2. Press down the media holder lock switch to fix the media holder.
3. Feeds the media through the rear external label entrance chute. And place the paper,
printing side face up, through the media guides, media sensor and place the label leading
edge onto the platen roller.
Rear external
label entranc
e
4. Close the top cover gently.
5. Use “Diagnostic Tool” to set the media sensor type and calibrate the selected
(Start the “Diagnostic tool”
Select the “Printer Configuration” tab
Click the “Calibrate
Sensor” button)
Note: Please calibrate the gap/black mark sensor when changing media.
12