User manual

27
10/07 Rev. 2.1 USER MANUAL
LA-BO
Adjusting the labelling application height
In general, to obtain a good apply accuracy of the label on the
product, it is recommended to adjust the LA-BO as close as possible
to the product surface. Obviously a safe distance has to be respected
so the conveyed products can not come in contact with the parts of
the LA-BO, especially the blow pipe for air stream support (see p.16).
Variations in product height also have to be considered when
adjusting the height of the LA-BO.
The labelling distance of the LA-BO to the product surface may vary
between 20 mm and maximum 100 mm.