Instruction manual

Care and Maintenance 9-3
4. Clean the platen roller when you see significant adhesive build-up or a
label is wrapped around the platen roller. Use a dry, soft-bristle brush,
such as a toothbrush, to clean the platen roller.
If the brush does not remove all the adhesive, use isopropyl alcohol on
the roller. Moisten a cotton swab with isopropyl alcohol and run the
cotton swab across the platen roller. Turn the platen roller with your
finger to make sure the platen roller is clean all the way around.
After cleaning, feed several inches of supply through without printing to
remove any remaining isopropyl alcohol.
5. Moisten a cotton swab with isopropyl alcohol. Rub the cotton swab
across the peel bar and remove any build-up.
6. Moisten another cotton swab with isopropyl alcohol. Rub the cotton
swab across the printhead and remove any build-up. You may need to
use a printhead CLEAN-STRIP if the printhead is extremely dirty or you
see streaks on the supply.
Printhead