Instruction manual

Setting Communications 5-3
Stop Bits
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. Then, follow these steps.
1. Press » or ¼ until you see
SERIAL COMM
» Stopbits ¼
2. Press Enter/Pause. The current setting is displayed, for example:
STOPBITS
1 ¼
3. Press » or ¼ to display the number of stop bits you need, then press
Enter/Pause. Press Escape/Clear until you see the Main Menu.
Parity
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. Then, follow these steps.
1. Press » or ¼ until you see
SERIAL COMM
» Parity ¼
2. Press Enter/Pause. The current setting is displayed, for example:
PARITY
None ¼
3. Press » or ¼ to display the parity you need, then press Enter/Pause.
Press Escape/Clear until you see the Main Menu.