Instruction manual

3. Press Enter/Pause.
Are you sure?
No ¼
4. Press ¼ to display "Yes" and press Enter/Pause.
CREATING FLASH
FILE SYSTEM 1
The printer's flash memory is cleared and reformatted. This process may
take several minutes. The printer reboots automatically after formatting
flash memory. You need to resend any fonts you want to use to flash
memory again. You return to the "Print Mode Ready" menu.
Checking Available Flash Memory
If you receive errors when downloading a script or other packets, make sure
you have enough flash memory available.
Note: When you format flash memory, the script and any downloaded
TrueType fonts saved in the printer's flash memory are deleted and
must be resent to the printer.
To check available flash memory, from the Main Menu, select Setup. Then,
follow these steps.
1. Press » or ¼ until you see
SETUP
» Flash Memory ¼
2. Press Enter/Pause.
3. Press » or ¼ until you see
FLASH MEMORY
» Unused Flash ¼
6-8 Operator's Handbook