Instruction manual

Setting the Print Contrast
The print contrast controls the darkness of the printing on your supply. The
range is -699 to +699 and the default is 0. You may need to increase the
print contrast for linerless supplies. Having the correct print contrast setting
is important because it affects how well your bar codes scan and how long
your printhead lasts. You can use a verifier to check the bar code print
quality.
Main Menu
Cancel All Print Mode Repeat
Batch
Setup Scripts Diagnostics
Supply
Contrast
Defaults
Port
Settings
Flash
Memory
High contrast settings may
♦ require additional printhead cleaning.
♦ create bar code growth, leading to reduced scanning.
1. From the Main Menu, press » or ¼ until you see
MAIN MENU
» Setup ¼
2. Press Enter/Pause. Press » or ¼ until you see
SETUP
» Contrast ¼
3. Press Enter/Pause. The current setting is displayed, for example:
Enter contrast
[-699/+699]: +0
4. Press » or ¼ to change the contrast. Pressing ¼ darkens the print; »
lightens the print.
Setting Supply Options 4-15