Instruction manual

Using Linerless Supply
Linerless printing is an option that must be purchased separately on the
original printer order. The linerless option is not customer or field-
installable.
You must use thermal direct and black mark supplies for linerless
applications. The linerless printer must use on-demand mode.
For maximum platen roller life, use only wide or only narrow supplies.
Switching between wide and narrow supplies may lead to uneven platen
roller wear and possibly reduce the platen roller life. Use the narrow
setting for linerless supplies.
Note: To prevent jams, do not leave the printhead closed (in the locked
position) longer than 30 minutes without printing. Open (unlock) the
printhead before a break period, at the end of each shift, and at the
end of each day.
Your linerless machine includes a shelf already installed. You can remove
the shelf and add the peel edge if you are not using linerless supplies.
Adding the Peel Edge or Shelf
1. Turn off the printer.
2. Open the cover.
3. Unlock the printhead by turning the retaining latch.
4. Lift the printhead assembly using the printhead tab until the assembly
locks into place.
Loading Supplies 2-9