Instruction manual

2
LOADING SUPPLIES
This chapter describes how to load:
♦ a roll of supply
♦ fan-fold supply
♦ a roll of tag supply.
There are two types of supplies:
Thermal Direct specially treated thermal supplies that do not use a
ribbon for printing.
Thermal Transfer standard supplies that require a ribbon for printing.
If you are using thermal direct supplies, do not load a ribbon.
If you switch from black mark to die cut supplies, make sure the printer's
supply type is set correctly. See "Supply Type
" in Chapter 4 for more
information. Your System Administrator can also send the supply setup
packet to change the supply type. Refer to the optional Packet Reference
Manual for more information about sending the supply setup packet.
Loading Supplies 2-1