Service manual

M09416
®
TTXLI
®
Thermal Transfer Printer
36
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3 Release the button when LED becomes red and blinking. (Any red will do during the
5 blinks).
 It will calibrate the ribbon sensor and gap/black mark sensor sensitivity.
 The LED color will be changed as following order
Amber  red (5 blinks)  amber (5 blinks)  green (5 blinks) 
green/amber (5 blinks)  red/amber (5 blinks)  solid green