Service manual

M09416
®
TTXLI
®
Thermal Transfer Printer
25
2.13. Install SD Memory Card
1. Turn the printer upside down.
2. Remove the screw that fixes the memory card cover.
3. Plug in a SD card on main board.
4. Revert the memory card cover.
5. Reassemble parts in reverse order following the procedures above
* Recommended SD card specification.
SD V 1.0, V 1.1 SD V 2.0 (SDHC)
 128MB
 256MB
 512MB
 1GB
 4GB class 6
-Supported DOS FAT file system.
-Folders stored on the SD card should be in the 8.3 filename format.
-Approved SD card manufacturer: SanDisk, Transcend.
Memory Card Cover
Screw
SD Card