Service manual

M09416

TTXLI

Thermal Transfer Printer

2.8. Replacing Black Mark Sensor Assembly

1. Please refer to 3.1 for disassembling the lower cover and lower inner cover.

2. Disconnect all hardness.

3. Upside down the lower inner cover. Remove 4 screws and remove the plastic

laminate.

4. Remove 1 screw from the black mark sensor.

5. Upside down the lower inner cover.

6. Replace the black mark sensor assembly.

Screw

Black Mark Sensor

Lower inner

cover

Black Mark Senso

Fixing Plate

Lower inner cover

Black Mark

Sensor