Service manual

M09416

TTXLI

Thermal Transfer Printer

2.7. Replacing Label Guide & Gap Sensor Assembly

1. Please refer to 3.1 for disassembling the lower cover and lower inner cover.

2. Disconnect all the hardness.

3. Turn the lower inner cover upside down.

4. Screws off 4 screws and remove the plastic laminate.

5. Screws off 2 screws to remove the white label guide rack fixing plate

6. Remove 2 screws from a gap sensor PCB then remove the gap sensor PCB.

7. Turn over the lower inner cover.

Screws

Label Guide

Rack Fixing

Plate

Screw

Gap Sensor

PCB

Plastic Laminate

Lower inner cover

Screws