Instruction manual

Important: Tuck the plastic line attaching the supply holder to the printer down out of
the way of the supply holder and supply holder guides. Otherwise, the
plastic line may wrap around the supply holder or get caught on the
supply holder guides.
8. Turn the dial to adjust the supply guides to their widest position.
9. Remove the first two labels from the backing paper.
10. Feed the labels, printing side up, through the supply guides and over the platen
roller.
Supply Guides
11. Press the labels under the supply guides.
12. Turn the dial to move the supply guides so that they barely touch the edges of the
backing paper.
13. Feed the backing paper under the peel roller and through the peel door opening.
Peel Door Opening
Peel
Roller
Loading Supplies & Printing 2-7