Specifications

26 WI-125 LED Indicator User Instructions
Indicator Diagnostics
4 Indicator Diagnostics
4.1 Test Mode
The test mode is used to test various functions of the WI-125. The test menu is shown
in Figure 4. Instructions for using the test menu are found below.
Figure 4.1 Test Menu
Press MENU to move Æ in the diagram
Press and hold MENU for 1.5 seconds to move Å in the diagram
Press PRINT/SELECT to move È in the diagram
Press PRINT/SELECT for 1.5 seconds to select new choice and move Ç in the
diagram
Press G/N at any time to save changes and return to gross/net weighing mode
1. Enter the test mode from gross/net operation by pressing and holding the
MENU key until tESt is displayed. SEALEd or unSEALEd is displayed briefly
while you hold the key. If you release the MENU key too soon, press G/N to
return to normal weigh mode and begin again.