Specifications

WI-125 LED Indicator User Instructions 25

3.10 Operations Menu

Your WI-125 LED may be configured to display some or all of the following functions:

tare, id, time, date, accumlator, and count. These can be viewed and changed if

allowed by the security code. This manual assumes the unit is configured to allow full

access to all functions. You can disable unneeded options. Instructions are in the

Service Manual.

Below is a flowchart and general instructions for moving around the operations mode

menu. The instructions in the preceding sections outlined the steps in detail for moving

around in this menu. Use this flowchart as a quick reference to maneuver through the

operations mode menu.

Figure 3.3 Operations Menu

Press MENU to move Æ in the diagram

Press and hold MENU for 1.5 seconds to move Å in the diagram

Press PRINT/SELECT to move È in the diagram

Press PRINT/SELECT for 1.5 seconds to select new choice and move Ç in the

diagram

Press G/N at any time to save changes and return to gross/net weighing mode