Specifications

WI-125 LED Indicator User Instructions 21
3.9 Single Accumulator with Counter
3.9 Single Accumulator with Counter
There is a single channel accumulator in the indicator. The accumulator will add the
displayed weights automatically and print individual weights and totals on command.
3.9.1 Weighing and Printing
1. Weigh load…
Indicator displays weight.
2. Press PRINT…
Weight is printed.
3. For each additional load weighed, press PRINT…
Each weight is printed individually and the weight is totalled
automatically within the indicator.
4. After the last load has been weighed and printed, press MENU, then TARE…
The total weight and count are printed and cleared from memory.
Figure 3.2 WP-233 Tape printer sample printout
Printing the accumulated weight and count can be accomplished at any time during
the weighing process; however, printing these values automatically clears them from
memory! So take care to print the accumulated values only after you have made all
the necessary weighments.
A print/add function will occur if you have autoprint enabled or if a remote Print
command is received by the indicator.
WI-125 LED is configurable for LP02844 labels