Specifications

20 WI-125 LED Indicator User Instructions
Indicator Operation
4c. Press G/N to return to the weighing mode.
Display returns to gross/net mode.
3.8 Viewing and Setting the Date
Your indicator must have the appropriate circuitry and HOUR must be enabled
and set correctly to allow the following:
1. From gross/net weighing mode, press MENU repeatedly until…
dAY is displayed.
2. Press SELECT…
Depending on the configuration of your indicator you will see the date
displayed in one of three ways:
month-day-year, or
day-month-year, or
year-month-day.
3. To change the date, key in the new date using the numeric keypad.
4a. Press SELECT to return to the operations mode menu…
The old date is replaced with the new date.
OR
4b. Press G/N to return to gross/net weighing mode.
The date is accepted and dAY is displayed.
See Operations Menu on page 25 for menu details.
If you enter an incorrect digit, press CLEAR to clear the display one digit at a time.