Specifications

WI-125 LED Indicator User Instructions 19
3.7 Viewing and Setting Time
3. With the current ID number displayed, enter a numerical value for your ID
number using the keypad…
The new ID number is displayed.
4. After your new ID number has been displayed, press SELECT…
id. is displayed.
5. Press G/N to return to the weighing mode.
Display returns to gross or net mode.
3.7 Viewing and Setting Time
Your indicator must have the appropriate circuitry and be configured to allow the
following:
1. From gross/net weighing mode, press MENU repeatedly until …
Hour is displayed.
2. Press SELECT…
In the 12 hour clock configuration you will see time displayed as hours,
minutes and A for A.M. or P for P.M. (09.40 A). In the 24 hour clock you
will see hours, minutes and seconds (09.40.38).
3. To set the 12 hour clock, use the numeric keypad to enter the correct time.
3a. Key in the time as hh mm.
3b. Press the TARE key to toggle between AM & PM.
3c. After the correct time is entered, press SELECT to accept the new time.
Hour is displayed and clock begins.
3d. Press G/N to return to the weighing mode.
Display returns to weigh mode.
To set the 24 hour clock, use the numeric keypad to enter the correct time.
4a. Key in time as hh mm ss.
4b. After the correct time is entered, press SELECT to accept the new time.
Hour is displayed and the clock begins.
See Operations Menu on page 25 for menu details.
If you enter an incorrect digit in step 3 below, press ZERO/CLEAR to clear the display
one digit at a time.