Specifications

18 WI-125 LED Indicator User Instructions
Indicator Operation
To Activate and Control the Cutoffs
There are two ways--Methods A or B--to activate the cutoffs. Method A activates the
cutoffs immediately while displaying the changing weight on the scale, and Method B
allows you to view the weight on the scale before the cutoffs are activated.
Method A:
1. With HALtEd displayed, press MENU…
run is displayed.
2. Press SELECT…
r xxxxxx is displayed. xxxxxx represents the weight as it changes on
the scale.
Method B:
3. With HALtEd displayed, press SELECT…
h xxxxxx is displayed. xxxxxx represents the weight on the scale.
4. Press MENU…
r xxxxxx is displayed. xxxxxx represents the weight as it changes on
the scale.
To halt active cutoffs
You may halt an active cutoff at any time.
With r xxxxxx displayed, press any key…
h xxxxxx is displayed and cutoffs are halted.
To return to Gross/Net weighing mode
You may return to G/N weighing mode at any time during this process by pressing
GROSS/NET…
Display returns to G/N weighing mode.
3.6 ID Number Entry
You may enter an ID number of up to 8 digits in length. The ID number may include any
combination of the numbers 0 through 9, a dash and a decimal point.
1. From gross weighing mode, press MENU repeatedly…
id. is displayed.
2. Press SELECT …
The current ID number is displayed.
See Operations Menu on page 25 for menu details.