Specifications

12 WI-125 LED Indicator User Instructions
Indicator Operation
3 Indicator Operation
3.1 Powering Up
The unit will power up in gross or net weighing mode, depending on what mode the unit
was in when last turned off. All calibration, zero, gross and tare values will be
maintained during power loss.
The indicator display, Figure 2, tells you the status of the indicator through the
appearance of annunciators. In the LCD version, the annunciators are small arrows
pointing to the different labels around the display face. In the LED version they are
small labeled lights on the front panel.
Figure 3.1 Indicator Display
3.2 Annunciators
Gross - Appears when indicator is in gross weighing mode.
Net - Appears when a tare is in effect and the indicator is in net weighing mode.
Zero - Appears when the scale is within ±¼ division of zero.
Print - Appears when the print key is pressed and while data is transmitted.
lb, kg - Points out the active unit of measure in weighing mode.
Annunciator
No annunciators appear while motion is detected.