User`s manual

9
Model 1310 Truck Scale In/Out Application User’s Manual
Operation
Follow these steps to perform truck in/out operations:
1. When the indicator is powered up you will see this screen. . .
2. Be sure scale is zeroed by pressing the ZERO key. After an inbound
truck comes onto the scale, press the IN key. . .
The inbound weight is stored in the OPEN database and the
screen below is displayed.
3. Key in up to 16 alphanumeric characters for the truck ID. You can enter
alphanumerics in several ways.
A) Use the CHR soft keys to scroll through the alphanumeric list
and move the cursor using the ADV and PREV soft keys.
B) Use the keypad on the 1310, following the directions for
alphanumeric entry in the Front Panel Keys section of this
manual.
C) Use an optional remote keyboard to enter the numbers and
alpha characters. With a remote keyboard attached, only
alpha entries are allowed from the front panel keys.
When you have entered the ID, press the ENTER key. . .
is displayed.
This is a friendly reminder to have a printer attached and ready to
print if you want to have an inbound ticket printed.
Inbound Procedure
Powerup
If you have an optional PS2-
style keyboard attached to the
indicator, below is a list of
keyboard key strokes and their
equivalent on the indicator:
Keyboard Indicator
ALT-S SELECT key
ALT-Z ZERO key
ALT-T TARE key
ALT-C C key (clear)
ALT-U UNITS key
ALT-P PRINT key
ALT-ESC Access to setup menu
ENTER ENTER key
or YES soft key
ESCAPE ESC key
or NO soft key
1..9 Numeric entry
A..Z Alphabet entry
F1..F5 F1..F5 key
F6 PRINT key
. Decimal point
Y YES soft key
N NO soft key