User`s manual
8
Model 1310 Truck Scale In/Out Application User’s Manual
Overview
Truck Scale In/Out Application Introduction
Serial Port Configuration
The Truck Scale In/Out software application installed in the 1310 allows you
to automate truck weighing. You can track up to 250 different open transac-
tions and store up to 1,000 completed transactions. You can also store up to
500 tare weights.
Serial ports are configured for transmitting information to different devices;
printer, computer and remote display.
Serial port #1 is configured for use with dot matrix printers such as the TM-
295, WP-233, or WP-234 printers. Configuration is 9600 baud, 8 data bits,
no parity, no handshake, basic control mode.
Serial port #2 is configured for use with a computer. Configuration is 9600
baud, 8 data bits, no parity, no handshake, basic control mode.
Serial port #3 is configured for use with the Weigh-Tronix flip digit remote
display. Configuration is 9600 baud, 8 data bits, no parity, no handshake,
basic control mode.
Serial port #4 is configured for use with the Truck Weigh PC software
program. Configuration is 19,200 baud, 8 data bits, no parity, no handshake,
basic control mode.
The following data is stored for each open transaction and is included in the
open transaction report:
• Truck identification number (up to 16 alphanumeric characters)
• Inbound weight
• Time of inbound transaction
• Date of inbound transaction
The following data is stored for each completed transaction and is included
in the transaction report:
• Truck identification number (up to 16 alphanumeric characters)
• Inbound weight
• Time of inbound transaction
• Date of inbound transaction
• Outbound weight
• Time of outbound transaction
• Date of outbound transaction
The Tare database stores up to 500 tare weights. You can print tare weight
tickets using the PRINT key.
Serial port #3 is used to send the displayed weight to a Weigh-Tronix flip
digit remote display. The data is sent 1 times/second.
Open Transaction Database
Completed Transaction
Database
Tare Database
Remote Display
Data stored in the databases is
in calibration units.