User`s manual

7
Model 1310 Truck Scale In/Out Application User’s Manual
Press the PRINT key to send data to a connected
printer. By default this key performs a DOPRINT
command followed by a DOACCUM command.
Press the TARE key to tare the current gross weight,
then repeatedly press SELECT to scroll through the
tare, gross and net weight displays.
Press the ZERO key to establish a zero reference. A
center-of-zero icon will be displayed when the weight is
within ¼ division of zero. During motion an M will appear
below the center-of-zero icon.
Press the ESCAPE key to back out of menus or cancel
a numeric entry without accepting the value. Press and
hold the ESCAPE key for 3-5 seconds to gain access to
Password Entry Mode.
Press the C(Clear) key to clear values from the display
prompts. Press and hold the C key for five seconds to
power down the indicator.
Press the ENTER key to enter a keyed in value or
accept a displayed choice.
The alphanumeric keypad is for entering number and
alpha characters. If a display for entering numbers only
appears, you can key in the numbers using the keypad
normally.
If a display appears in which alpha or numeric charac-
ters can be entered, key function switches automatically
so that repeated pressing of one key causes the num-
ber to appear first, followed by the alpha characters in
descending order as labeled on the key. If you wait for
the cursor to appear on the display and press a key, a
new character is added to the previous one entered.
Soft keys are so-called because their function is not fixed. Function can
change as mode of operations change or as the program for your particular
setup changes.
There are five predefined soft keys used in the Truck In/Out application. See
Figure 1.
Soft Keys
If a display appears in which
alpha or numeric characters
can be entered, key function
switches automatically so
that repeated pressing of
one key causes the number
to appear first followed, by
the alpha characters in
descending order as labeled
on the key. If you wait for the
cursor to appear on the
display and press a key, a
new character is added to
the previous one entered.
If the indicator is powered down
via the ON/OFF/Clear key or
by sleep mode time-out, press
this key to power the indicator
back up.
ON/OFF
Clear
key