User`s manual

4
Model 1310 Truck Scale In/Out Application User’s Manual
Power Input
Excitation
Operational Keys
Operational Annunciators
Display
Display Characters
Display rate
A to D Conversion Rate
Unit of Measure
Capacity Selections
Incremental Selections
Decimal locations
Displayed Resolution
Audio Output
Time and Date
Internal Resolution
Harmonizer
™
digital filtering
Memory
Standard input and outputs
Dimensions
Available Options
Fieldbus Network Interfaces
Operating Temperatures
Enclosure
Weight
Agencies
Universal 85-265 VAC, 50/60Hz, 75VA
10 Volts DC or 10 volts AC square wave capable of driving up to thirty-two 350-ohm weight
sensors. Indicator is also capable of driving Quartzell
TM
transducers
Zero, Tare, Print, Units, Select, Enter, Escape, Clear, 0-9/Alpha,
Decimal Point and Five Soft Keys labeled per selected operational routine.
Displayed symbols indicate motion, center of zero, unit of measure and more.
Model 1310—Dot graphic display, 5"W x 1.33"H provides images and up to eight lines of
weight and/or text. 240 x 64 dots cold cathode flourescent backlit, white on blue.
Application defined. 1.16" to 0.145" high.
Selectable, from 1 in 10 seconds to 10 times per second
60 times per second
Pounds, kilograms, grams, ounces, pounds and ounces and four programmable custom units
Up to 10,000,000 selectable
Multiples and sub multiples of 1, 2, 5
88888888 pick any location relative to division size
Up to 1 part in 10,000,000
Audio tone for key contact assurance or operational alarms
Battery protected real time clock is standard
1,000,000 counts analog, Quartzell
TM
transducer higher
Fully programmable to ignore noise and vibration
128K (expandable to 8MB)
Com 1: RS232, RS-485/422, Quartzell
TM
, SensorComm
TM
Com 2: RS232, 20 mA current loop
Com 3: RS232, RS-485/422, Quartzell
TM
, SensorComm
TM
Com 4: RS232, RS-485/422, Quartzell
TM
, SensorComm
TM
(One bi-directional signal per port)
Four set point I/O ports via OPTO 22 I/O modules
1 Analog scale input
PS/2 Keyboard port
7.25" H x 11" W x 8.25" D (184 mm x 279 mm x 205 mm)
- Multiple analog scale inputs, up to seven additional (16-Bit D/A)
- Eight fully isolated, programmable analog outputs (selectable 0-20mA, 0-24mA, 4-20mA,
0-5VDC, 0-10VDC, ±5VDC, ±10VDC)
- Remote expanded control interface for TTL or solid state up to 64
- OPTO 22 Generation 4 I/O Modules
- Internal modem
- Memory Expansion - 1, 4, 5, 8 MB (battery backed SRAM)
- PC (AT) style alphanumeric keyboard
- Up to sixteen pulse counter inputs
- SensorComm
TM
Digital j-box
- Traxle
TM
total truck and axle weighing
Device Net
TM
, ProfiBus
®
, ControlNet
TM
, InterBus, ModBus Plus, Ethernet 10/100 (ModBus
TCP, TCP/IP (sockets), HTTP, SMTP, FTP, EtherNet/IP)
NTEP 14 to 104° F (-10 to 40° C), 10 to 90% relative humidity
Stainless steel wash down enclosure NEMA 4X
17 lb, 7.7 kg
NTEP Class III/IIIL:10,000d CC# 01-033 A1
FCC Class A
1310 Specifications