User`s manual

Model 1310 Truck Scale In/Out Application User’s Manual

SIG Soft Key

DLOAD Soft Key

Press the ESC key to back out

of most displays and return to

the previous display.

Press the SIG soft key to see a constantly changing display similar to the

example below:

This screen shows the number of packets of information sent to the

SensorComm system and the number received back correctly. This is a

measure of the relative reliability of your communication setup. If the signal

strength shows a lower percentage, chances are the system is experiencing

some kind of line noise and thus, less reliable communication.

Press the DLOAD soft key to view the deadload analysis for each weight

sensor. You will see a display similar to the example below:

This display shows the calibration counts, current raw counts and difference

for sensor #1.

Press the G_LOG soft ket to view the log of error messages concerning

ghosted weight sensors. See example below.

Press the appropriate softkey to scroll through the available error messages.

Time and dates of errors are displayed.

X = active error

Y = Number of errors

2 = Cell number that was "ghosted"

G_LOG Soft Key