User`s manual

Model 1310 Truck Scale In/Out Application User’s Manual

MODM Appears only if modem is enabled by a SimPoser

program. The display will show Port #, Status (see list at

left), User configuration information.

TRAFF Press this soft key to see the System Counter Menu.

This shows you the traffic, overload, and underload

counter values. See example below.

If the scale experiences a load exceeding 105% of

capacity, an overload event is logged. Press the OVER

soft key to see the log of overloads. Example below.

Press the PREV or NEXT soft keys to scroll through the

list of overload event times and dates. Press the

CLEAR soft key to clear the displayed event.

If the scale experiences a negative weight exceeding

105% of capacity, an underload event is logged. Ex-

ample below.

Press the PREV or NEXT soft keys to scroll through the

list of overload event times and dates. Press the

CLEAR soft key to clear the displayed event.

The traffic counter increments when weight exceeds the

configured trigger point (% of scale capacity). (See the

Service Manual for configuration information.) For the

next weightment to increment the counter, the weight

must fall below the configured re-arm point (% of scale

capacity).

Modem status list:

1 = initialize

2 = set auto answer

3 = set user config

4 = port ready

5 = dialing

6 = error

7 = connected

8 = disconnected

9 = initialize 2