User`s manual

16
Model 1310 Truck Scale In/Out Application User’s Manual
Accessing Software Version
The time may come when you are asked by a service technician what the
software version of your software is. There is a series of key strokes which
will bring that number up on the screen. Below are the instructions for
accessing this information.
1. Press and hold the ESCAPE key until the 1310 beeps.
2. Within five seconds, key in the number 111 and press ENTER.
3. Press the soft key labeled VIEW.
4. Press the soft key labeled VERS. The software version will appear on
the display.
Setting Time and Date
1. Press and hold the ESCAPE key until the Model 1310 beeps. . .
The display asks for a password and looks like the example
shown below:
2. Key in 111 and press ENTER. . .
A new soft key set appears.
3. Press the CLOCK soft key to access the time and date setting function.
4. The display shows the current hour value. If this is not correct key in a
new value and press ENTER or press ENTER to accept the current
value. . .
The display shows the minutes value.
5. Repeat step 4 for minutes, seconds, year, month and day. (The day of
the week is calculated automatically from the four digit year.)
6. Press the EXIT soft key to return to normal operating mode.