User`s manual

Model 1310 Truck Scale In/Out Application User’s Manual

See the next section to gener-

ate a print with a stored tare

weight.

Method 2: Tare Entry for

Existing Truck ID

4. The following is displayed:

5. Key in the weight and press ENTER. . .

The tare weight is stored under that Truck ID and the display

returns to a net weight display with that tare value active.

1. Press the TARE soft key (F2). . .

If you press 1, see Method 1.

If you press 2, go to step 2 below.

If you press 3, the action is aborted.

2. When you press 2. . .

is displayed.

3. Key in the known truck ID to recall the tare weight. This is a 16 charac-

ter, alphanumeric entry. Press the ENTER key. . .

is displayed. The display returns to a net weight display with that

tare value active.

If truck ID does not exist in database, no value can be recalled.

The following message is display:

TARE WEIGHT IS NOT STORED

The display then returns to the normal weighing operation

screen.

To enter a tare, perform the steps in Method 1 on previous page.