User`s manual

WP-233 Printer User’s Manual 7
Installing the
Paper
Introduction
Installation
The Model WP-233 dot matrix printer has one of
these electrical interfaces:
RS-232
Current Loop
This manual is split into the following main
sections:
• Introduction
• Installation
• Operation
• Maintenance
• Printer Test and Setup
• Communication
Please follow the precautions listed below when
setting up your printer. They are designed to help
you keep your printer working at its best.
• Plug your power supply into an appropriate
grounded outlet.
• Place your printer on a flat hard surface, like
a tabletop.
• Keep your printer out of direct sunlight.
1. Remove the printer cover by pressing on the
groove patterns to pop the front edge up. Lift
off the cover.
2. Press the rocker switch to the left. The light
will go off.