User`s manual

WP-233 Printer User’s Manual 35
Set Time and Date
Control Code 20
Read Time
and Date
Control Code 22
Cancel
Reverse Field
Control Code 24
Reverse Field
Control Code 25
Set Printer Config.
Code 26
After typing RUN, your custom character will be
stored in the printer’s memory. It will retain this
information until the printer is switched off or until
you write over the data by defining a different
character.
To print your newly designed character, simply
send CHR$(126) which corresponds to
hexidecimal value 7E.
This control code is used when setting the
printer’s time and date clock.
This control code is used to read the printer’s time
and date clock.
Sending this control code will turn OFF the reverse
field mode that is selected using control code 25.
Send this control code to turn ON the reverse field
printing mode. This will print white letters on a dark
background. Do not print more that three reverse
field print lines. Also, do not print more than a few
empty spaces in a reverse field. The printer may
become overloaded and stop printing.
This control code is used when setting the
printer’s various configuration parameters.