User`s manual

WP-233 Printer User’s Manual 29
CONTROL
CODES
Code
Function Abbreviation Hex Decimal
-NUL000
- SOH 01 1
Reserved STX 02 2
Reserved ETX 03 3
- EOT 04 4
- ENQ 05 5
Reserved ACK 06 6
- BEL 07 7
Back Space BS 08 8
-HT099
Line Feed LF 0A 10
-VT0B11
-FF0C12
Carriage Return CR 0D 13
Double Height SO 0E 14
Double Width SI 0F 15
Reset Seq. # to 0000 DLE 10 16
Inhibit Line Space DC1 11 17
Dot Graphics DC2 12 18
User Character DC3 13 19
Reserved NAK 15 21
Get time and date SYN 16 22
- ETB 17 23
Stop Reverse Field CAN 18 24
Reverse Field EM 19 25
Set Printer Config. SUB 1A 26
Escape ESC 1B 27
-FS1C28
24 Column Mode GS 1D 29
32 Column Mode RS 1E 30
40 Column Mode US 1F 31
Printer will ignore all other control codes.
According to the American Standard Code of
Information Interchange (ASCII), there are 32
control codes in addition to the codes for the
printable characters. (Control codes are sent as
data, but the receiving device interprets them as
abbreviated ‘’instructions”, communication - status
messages, etc.)
The printer recognizes these control codes: