User`s manual

WP-233 Printer User’s Manual 23
RESET SEQ#
When you have completed the SET DATE menu
the following is printed automatically:
Choose NEXT (left side) to increment the number
or OK (right side) to accept the 1. Repeat this
same procedure for hours and minutes as shown
below.
When everything is as you want it and you press
OK, START CLOCK is printed. Press OK (right
side) to start the clock. The printer then prints
Ready. . . showing you that it is out of the setup
menu and ready to print.
RESET SEQ# is the last setup menu item. This
menu item lets you reset the sequence number.
This number is the number of print transactions
since the last reset.
With the printer in the setup menu and with RESET
SEQ# as the last item printed, if you press OK
(right side) the sequence number will be reset to
zero and the printer will print Ready. . . showing it
is no longer in the setup menu and that the printer
is ready to print.
To skip resetting the sequence number to zero,
press NEXT (left side). CONFIGURE. . . is printed.
Unplug and replug in the printer to return to
printing mode. Ready. . . is printed.