User`s manual

WP-233 Printer User’s Manual 21
XON/XOFF is next.
Choices:
90/10 - The printer will send an XOFF when
the buffer is 90% full. As the buffer
empties the printer will send an XON
when the buffer reaches 10% of
capacity
90/80 - XOFF is sent at 90% and XON sent at
80%.
EXT CH SET is next. This stands for Extended
Character Set.
Choices:
YES - Allows you to use hexidecimal
numbers above 80 (true only for 8
data bits.)
NO - Disables the Extended Character Set
ability.
PRINT READY is next.
Choices:
YES - Prints Ready. . . upon power up.
NO - Disables printing Ready. . .
WARNING - If you choose NO, hold the left side
of the rocker switch down for 4-6 seconds to
access the setup menu. Begin timing when you
plug the unit and the red light comes on. The
paper feed motor does not run upon power up
when Ready. . . is disabled.
XON/XOFF
The choice to use the
extended character set
is available only when 8
data bits are chosen.
Ext Ch Set
Print Ready