User`s manual

WP-233 Printer User’s Manual12
Changing the
Printer Ribbon
If your printer is used infrequently, the print impres-
sion may become weak because the ribbon dried
out. To advance the ribbon to a new section, hold
down the Paper Feed switch for several seconds.
Below are the steps for replacing the ribbon:
1. Turn the printer offline.
2. Four small grooves are embossed on each
side of the printer cover. Push down on one or
both of these areas until the printer cover tilts.
3. When the printer cover is tilted up, lift it
completely off.
4. Push down on the right side of ribbon car-
tridge where it is marked “PUSH”. Remove the
cartridge.