User`s manual

WP-233 Printer User’s Manual10
To Remove the
Paper Roll
12. Put the paper spindle into the paper roll as
shown below, and place the roll with the
spindle onto the snaps near the back of the
printer. Turn the paper roll so as to take up any
slack in the paper feeding to the printer. Make
sure the roll of paper turns freely. If it does not
turn freely, the paper will jam and will possibly
damage the printer mechanism.
1. Advance the paper about one inch beyond the
paper cutter by using the Paper Feed switch.
2. Lift the paper roll away from the printer
housing and cut the paper feeding to the
printer with scissors. Try to make the cut as
square as possible to help the next time you
reload the paper.
3. Pull the remaining paper through the printer
mechanism. Be sure to pull the paper from
the top (paper cutter side).
WARNING! Pulling the paper out of the back of
the printer will damage the print mechanism.